The concealed humidity-controlled extract unit with integrated filter to
preserve the durability of installations.
The BXC-EF combines the BXC-E range with a grease filter to prevent clogging and increase durability. To preserve the aesthetics of the diffuser, the filter has been integrated into the design using an aesthetic perforated plate. The recessed casing of the BXC-E has been kept to minimise the visual clutter of the diffuser.
Flush-mounted exhaust unit : discreet and non-intrusive.
Humidity sensitive switch versions : modulates the airflow according to the various needs of the dwelling.
Silent working : silent auxiliary airflow activation
Battery indicator : buzzer to indicate low battery level
Easy to maintain : removable shutter case and front cover for easy cleaning
Descriere
Caracteristici
Schematic
Accesorii
Galerie
Videouri
Documente
Airflow ‘+’
Based on the same principle as the BXC-E range, this new unit uses a humidity sensor to adjust the opening of the unit and the air renewal in each room. Thanks to optimised ventilation, the BXC-E range promises immediate energy savings. If required, an additional airflow can also be activated by switch.
Adjustment of flow and installations compliance
The integrated pressure plug measures the pressure directly at the extract unit to check that installation complies with regulations. In the event of a particular configuration or insufficient pressure, the adjustment flap can be adjusted to increase the flow cross-section (6 positions with an interval of 10m3 /h) and thus ensure compliance with regulatory requirements.
Design grease filter for the kitchen/dining room
The grease filter is used to filter grease and large dust particles. Suitable for use in kitchens to prevent clogging and preserve the durability of installations.
Flush-mounted exhaust unit
BXC-EC h
BXC-EC h
BXC-EC h
BXC-EC hi
BXC-EC f
Standard code (other versions available, please contact us) ø100
BXE2070
BXE2080
BXE2079
BXE2075
BXE2072
Angled version ø100
BXE2069
–
–
BXE2076
–
Airflow characteristics
Humidity sensitive
■
■
■
■
–
Boost airflow
■
■
■
■
–
Boost airflow activated by switch
–
–
–
■
Boost airflow activated by presence detection
–
–
–
–
–
Airflow @ 100 Pa (min.-max.) (1) (2)
m3/h
12-80
12-60
12-45
12-80
12
Airflow ’+’ – maximum available airflow @ 100 Pa (3)
12 VAC supply with specific transformer (ref. CAL261)
–
–
–
⊗
–
230 VAC supply with specific transformer (ref. CAL1228)
–
–
–
⊗
–
Characteristics
Colour
white RAL9003
white RAL9003
white RAL9003
white RAL9003
white RAL9003
Material (main)
PS / ABS
PS / ABS
PS / ABS
PS / ABS
PS / ABS
Installation
Round duct compatibility with integrated spigot
mm
ø100
ø100
ø100
ø100
ø100
Round duct compatibility with integrated spigot with integrated 90° elbow ferrule ø100 (4)
mm
■
–
–
■
–
Round duct compatibility with accessory spigot (5)
mm
ø125
ø125
ø125
ø125
ø125
Round duct compatibility with 85343AL accessories
mm
ø80
ø80
ø80
ø80
ø80
Other functions
Pressure plug
■
■
■
■
■
Fault indicator thanks to a built-in pressure sensor
–
–
–
–
–
■ : standard / included ⊗ : compatible
Note: airflow given for a ø100 duct
(1) Default setting.
(2) Tolerance : 12m3/h +/- 3 , 80m3/h +/- 10.
(3) Airflow ‘+’: the airflow can be increased from +10 m3/h to +50 m3/h (6 positions available). This function can be used to adapt to lower pressure or to specific regulations imposing higher airflows. Standard is position 0 (minimum airflow = 12 m3/h @ 100 Pa).
(4) Delivered in specific versions.
(5) Delivered in specific versions or available as accessory (ref. AEA317).
Other versions available, please contact us.
AIRFLOW / DIMENSIONS IN MM
IMAGE
CODE
DESIGNATION
CAF
CAF Stops the propagation of fire cold smokes through ventilation ducts
CAL261
CAL261 Supply device 12 VAC / 3 VDC (mandatory for BXC connected to 12 VAC supply)
CAL1228
CAL1228 Supply device 230 VAC / 3 VDC (mandatory for BXC connected to 230 VAC supply)
33007AL
33007AL Trident plastic sleeve ø125 mm – L 125 mm
85343AL
85343AL Trident plastic sleeve ø125 mm – ø80 mm – L 125 mm
Grila BXC incorporeaza toate functiile ce pot fi cerute unei grile destinate evacuarii aerului viciat. Activata in diferite moduri cum ar fi higroreglabilitatea, detectia prezentei, a concentratiei de CO2 si a compusilor volatili VOC de exemplu, grila BXC adapteaza in mod automat debitul de aer functie de cerintele locatarilor, in orice situatie, pentru oricare dintre camere.
Grila destinata evacuarii controlate a aerului viciat pentru ventilatia naturala sau hibrida
G2H inaugureaza prima grila destinata evacuarii aerului viciat si optimizata cu acuratete pentru ventilatia naturala si hibrida, aplicabila atat proiectelor de cladiri noi cat si celor supuse lucrarilor de reabilitare.
Grila higroreglabila destinata evacuarii aerului viciat prin tiraj natural
Ajustand debitul de aer functie de valoarea umiditatii relative a aerului din interiorul locuintei, grila higroreglabila GHN destinata evacuarii aerului viciat prin intermediul tirajului natural reprezinta solutia perefecta pentru aerisirea camerelor umede.
Grila destinata evacuarii aerului viciat care functioneaza in conditii de presiuni scazute
Special adaptate pentru a functiona in conditii de joasa presiune, grila higroreglabila GBP destinata evacuarii aerului viciat reprezinta solutia ideala in proiectele de reabilitare a traseelor de ventilatie care initial au fost proiectate pentru ventilatia prin tiraj natural.
